Inilah Pengetahuan Mekanika Bahan yang Wajib Anak Teknik Tahu
Guru Vokasi
23.34.00
Mekanika bahan merupakan bagian dari mekanika terapan yang berusaha menjelaskan perilaku benda padat yang mengalami pembebanan. Benda pa...
Tampilkan postingan dengan label regangan. Tampilkan semua postingan
Tampilkan postingan dengan label regangan. Tampilkan semua postingan
How to Solve: The Additional Tension in Each Wire
Guru Vokasi
11.19.00
The rigid Bar AD issupporteed by two steel wires of 1/16 in. diameter (E = 29 x 10 6 psi) and a pin and bracket at D . knowing that...
How to Solve: Maximum Load P that May be Applied
Guru Vokasi
11.18.00
2.44 Three wires are used to suspend the plate shown. Aluminium wires are used at A and B with a diameter of 1/8 in. and steel wire is...
How to Solve: The Force is Given by Vise on The Tube Every Shift
Guru Vokasi
11.17.00
2.43 Solve problem 2.42 , assuming that after the forces have been applied, the vise is adjusted to decrease the distance between its...
How to Solve: The Force Exerted by The Vise on The Tube
Guru Vokasi
11.15.00
2.42 A Steel tub (E = 200 GPa)with a 32-mm outer diameter and a 4-mm thickness is placed in a vise that adjusted so that its jaws ...
Solve: Determine the Maximum Force P That Can be Applied Vertically at Point A
Guru Vokasi
11.12.00
Link BD is made of brass E = 15 x10 6 psi and has a cross-sectional area of 0...
How to Solve: The Reactions at A and D on Two Cylindrical Rods - Mechanical of material
Guru Vokasi
11.12.00
2.41. Two cylindrical rods, CD made of steel (E = 29 x 10 6 psi) and AC made of aluminium ( E = 10,4 x 10 6 psi) , are joined at B a...
How to Solve Determine The Normal Stress In The Bolt and In The Tube
Guru Vokasi
11.09.00
2.40 A brass bolt (E b = 15 x 10 6 psi) with a 3/8-in. diameter is filted inside a steel tube (Et = 29 x 10 6 psi) with a 7/8-...
How to Solve Determine The Stress In Each Rod
Guru Vokasi
11.09.00
2.39 Three steel rods (E = 200 Gpa) support a 36-kN load P. Each of the rods AB and CD has a 200-mm 2 cross-sectional area and rod...
How To Solve Determine the Maximum Centric Force
Guru Vokasi
11.08.00
2.38 For the post of problem 2.35, determine the maximum centric force which may be applied if the allowable normal stress is 20 ksi i...
How To Solve The Total Load if The Stress in The Brass
Guru Vokasi
11.07.00
2.37 Form the composite block shown in Problem 2.36, determine (a) the value of h if the portion of the load carried by the alumin...
How To Solve Determine The Normal Stress in The Brass Core and The Aluminium Plates
Guru Vokasi
11.06.00
2.36 An Axial centric force of magnitude P = 450 kn is applied to the composite block shown by means of a rigid end plate. Knowing that...
How To Solve: Mechanic of Material Normal Stresses in The Steel
Guru Vokasi
11.06.00
2.35 The 4.5-ft concrete post is reinforced with six steel bars, each with a 1 1/8-in. diameter Knowing that E s = 29 x 10 6 psi and E...
